Jeep Renegade, BU, BV (EU)
Differential fluid capacity & service interval
Jeep Renegade, BU, BV (EU) differential fluid capacity is 0,6 liter. Service intervals include 48 months/60000 km and 60000 km/36 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- All six configurations listed share a rear differential fluid capacity of 0.6 liter. A figure this small is typical of a compact rear differential unit, where the housing volume is limited by the axle's physical size rather than by a full-size truck-style carrier design.
- The 0.6 liter figure represents a service fill capacity, meaning the amount of fluid required when refilling a drained or partially emptied unit during routine maintenance, not the total volume of an overhaul or assembly fill.
- The Jeep Renegade 1.4 Multi Air 4x4 (2015-2018) carries a check interval of 48 months or 60,000 km under normal use conditions. The time-based limit of 48 months means the fluid condition must be evaluated at four years even if the distance threshold has not been reached.
- The 2.0 MultiJet variants across all power outputs and model year ranges specify a check interval of 60,000 km or 36 months under normal use conditions. The 36-month time limit is shorter than the 48-month figure assigned to the 1.4 Multi Air, meaning the diesel-engined configurations require more frequent time-based attention to rear differential fluid.
- The 1.4 Multi Air 4x4 covers model years 2015-2018, while all 2.0 MultiJet variants extend through 2020. Despite the difference in production span, the rear differential capacity remains identical at 0.6 liter across all of them.
- The 2.0 MultiJet engine appears in three distinct power outputs: 88 kW, 103 kW, and 125 kW. All three share the same rear differential capacity and check interval, indicating the differential unit is not differentiated by engine output within the 2.0 MultiJet family.
- AdBlue variants of the 103 kW and 125 kW 2.0 MultiJet, covering 2018-2020, carry identical rear differential specifications to their non-AdBlue counterparts. The addition of a selective catalytic reduction system for emissions control has no bearing on the rear axle fluid requirements.
- All intervals listed apply to normal use conditions. In differential service contexts, normal use typically refers to on-road driving without sustained heavy towing, off-road operation, or extreme temperature exposure, which would otherwise shorten the recommended service window.