Jeep Compass, MP (USA / CAN)

Coolant capacity & service interval

Jeep Compass, MP (USA / CAN) coolant capacity ranges from 6,5 to 8,6 liters. Service intervals occur at 150000 miles or 120 months. Data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Compass 2.0 (2022- )
  • Use: Normal
  • Capacity 8,6 liter
  • Change 150000 miles/ 120 months
Compass 2.0 AWD (2022- )
  • Use: Normal
  • Capacity 8,6 liter
  • Change 150000 miles/ 120 months
Compass 2.4 (2016-2022)
  • Use: Normal
  • Capacity 6,5 liter
  • Change 150000 miles/ 120 months
Compass 2.4 AWD (2016-2022)
  • Use: Normal
  • Capacity 6,5 liter
  • Change 150000 miles/ 120 months

Additional Notes

  • The Jeep Compass MP (USA/CAN) cooling system capacity differs noticeably between engine families, with the 2.0-liter requiring 8.6 liters versus 6.5 liters for the 2.4-liter, a difference of 2.1 liters that reflects the distinct thermal management architecture of each engine.
  • The 6.5-liter cooling system capacity listed for the 2.4-liter applies equally to both the front-wheel-drive and AWD configurations across the 2016-2022 model years, indicating the drivetrain layout does not alter the coolant volume requirement for that engine.
  • The same pattern holds for the 2.0-liter engine, where both the standard and AWD variants share an identical 8.6-liter cooling system capacity, again showing no capacity variation tied to drivetrain configuration.
  • All four configurations share the same service interval under normal use conditions: 150,000 miles or 120 months, whichever comes first. The 120-month figure equals a 10-year replacement cycle.
  • A 150,000-mile or 10-year coolant change interval is characteristic of modern long-life OAT (Organic Acid Technology) or HOAT (Hybrid OAT) coolant formulations, which are engineered to resist degradation far longer than older conventional coolants that typically required changes every 30,000 miles or 2 years.
  • The capacity values listed represent cooling system fills, meaning the total volume the system holds during a service refill rather than a figure associated with a full component overhaul or block replacement scenario.

Other Systems