Jaguar XF, X250 (USA)
Transfer case fluid capacity & service interval
Jaguar XF, X250 (USA) transfer case fluid capacity ranges from 0,5 to 0,62 liters. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| XF 3.0 V6 SC 4WD (2012-2015) |
|
Additional Notes
- The Jaguar XF X250 3.0 V6 SC 4WD lists two distinct transfer case fluid capacities: 0.62 liter for a dry fill and 0.5 liter for a service fill. The dry fill figure applies when the unit is completely empty, such as after a full overhaul or replacement, while the service fill figure reflects the smaller volume needed when some residual fluid remains after a standard drain.
- The 0.12-liter difference between the dry and service fill capacities is a meaningful distinction in practice. Using the dry fill volume during a routine service interval would result in overfilling the transfer case, which can cause seal stress and fluid leakage.
- The specifications apply to the 2012-2015 model years under normal use conditions, meaning the listed service fill volume of 0.5 liter is associated with standard operating environments rather than severe-duty cycles.
- The transfer case on the XF 3.0 V6 SC 4WD is noted as a transferbox configuration, which is a mechanical unit distributing torque between front and rear axles. The relatively small fluid capacity of 0.62 liter dry reflects the compact nature of such a unit compared to a full differential assembly.