Jaguar X-Type, X400 (EU)

Automatic transmission fluid capacity & service interval

Jaguar X-Type, X400 (EU) automatic transmission fluid capacity ranges from 7 to 8,8 liters. Service intervals include checks every 16000 km/12 months or every 6 months. The data covers 11 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
X-Type 2.2D (2008-2010)
  • Use: Normal
  • Capacity 7 liter
  • Code: AWF21 6/1
X-Type 2.5 V6 (2006-2010)
  • Use: Normal
  • Capacity 8,8 liter
  • Check 16000 km/ 12 months
  • Code: Jatco JF506E 5/1
X-Type 2.5 V6 (2006-2010)
  • Use: Severe
  • Capacity 8,8 liter
  • Check 6 months
  • Code: Jatco JF506E 5/1
X-Type 3.0 V6 (2006-2010)
  • Use: Normal
  • Capacity 8,8 liter
  • Check 16000 km/ 12 months
  • Code: Jatco JF506E 5/1
X-Type 3.0 V6 (2006-2010)
  • Use: Severe
  • Capacity 8,8 liter
  • Check 6 months
  • Code: Jatco JF506E 5/1
X-Type 2.0 V6 (2001-2005)
  • Use: Normal
  • Capacity 8,8 liter
  • Check 16000 km/ 12 months
  • Code: Jatco JF506E 5/1
X-Type 2.0 V6 (2001-2005)
  • Use: Severe
  • Capacity 8,8 liter
  • Check 6 months
  • Code: Jatco JF506E 5/1
X-Type 2.5 V6 (2001-2006)
  • Use: Normal
  • Capacity 8,8 liter
  • Check 16000 km/ 12 months
  • Code: Jatco JF506E 5/1
X-Type 2.5 V6 (2001-2006)
  • Use: Severe
  • Capacity 8,8 liter
  • Check 6 months
  • Code: Jatco JF506E 5/1
X-Type 3.0 V6 (2001-2006)
  • Use: Normal
  • Capacity 8,8 liter
  • Check 16000 km/ 12 months
  • Code: Jatco JF506E 5/1
X-Type 3.0 V6 (2001-2006)
  • Use: Severe
  • Capacity 8,8 liter
  • Check 6 months
  • Code: Jatco JF506E 5/1

Additional Notes

  • The Jaguar X-Type X400 automatic transaxle fluid capacity across the 2.0 V6, 2.5 V6, and 3.0 V6 petrol engines is uniformly specified at 8.8 liters, indicating a full system fill volume rather than a partial service drain-and-refill quantity.
  • The 2.2D variant carries a notably lower transaxle fluid capacity of 7 liters compared to the 8.8 liters shared by all V6 petrol configurations, reflecting the different transmission unit fitted to the diesel engine.
  • Under normal use conditions, the 2.0 V6 (2001-2005), 2.5 V6, and 3.0 V6 configurations all share a check interval of 16,000 km or 12 months, whichever comes first, applied consistently across both early and later production spans of those engines.
  • Under severe use conditions, the check interval for the 2.0 V6 (2001-2005), 2.5 V6, and 3.0 V6 transaxle fluid is reduced to every 6 months, with no distance figure specified, meaning time alone governs the service point in demanding operating conditions.
  • The 2.5 V6 and 3.0 V6 engines each span two distinct year ranges in the specifications, 2001-2006 and 2006-2010, yet the transaxle fluid capacity and check intervals remain identical across both ranges for each respective engine, at 8.8 liters with the same normal and severe schedules.
  • The 2.2D (2008-2010) specification lists only a capacity value with no check interval, whereas all V6 petrol entries carry both a capacity and a defined check schedule, distinguishing the diesel entry from the rest of the lineup in terms of service interval data.
  • A transaxle, as noted across all rows, combines the transmission and differential into a single housing, which means the 8.8-liter or 7-liter figures represent the total fluid volume for that integrated unit rather than a standalone gearbox alone.
  • The halving of the check interval from 12 months under normal conditions to 6 months under severe conditions, without a corresponding change in fluid capacity, indicates the severity classification affects service frequency rather than the physical volume of fluid the transaxle holds.

Other Systems