Jaguar E-Pace, X540 (USA)
Coolant capacity & service interval
Jaguar E-Pace, X540 (USA) models utilize coolant with a capacity range of 11,2 to 11,7 liters. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| E-Pace P300 AWD MHEV (2020-2022) |
|
| E-Pace P250 AWD (2019-2025) |
|
| E-Pace P300 AWD (2019-2020) |
|
| E-Pace P250 AWD (2017-2019) |
|
| E-Pace P300 AWD (2017-2019) |
|
Additional Notes
- The Jaguar E-Pace X540 P250 AWD carries a cooling system capacity of 11.2 liters across both the 2017-2019 and 2019-2025 model year spans, indicating no change in the total system volume between those two production periods.
- The P300 AWD configuration for 2017-2019 and 2019-2020 also shares the 11.2-liter cooling system capacity, placing the P250 and P300 petrol variants on equal footing in terms of coolant fill volume during those years.
- All 11.2-liter capacity figures across the P250 and P300 AWD rows are designated for normal use conditions, meaning the specified volume applies to standard operating environments rather than severe-duty cycles.
- The P300 AWD MHEV variant for 2020-2022 departs from the flat 11.2-liter figure seen in earlier configurations, with a capacity range of 11.4 to 11.7 liters. The range rather than a single value reflects variation within the mild hybrid system, likely tied to differences in the integrated electrical cooling circuit.
- A cooling system capacity expressed as a range, as seen in the P300 AWD MHEV at 11.4-11.7 liters, is typical when a secondary thermal management loop for hybrid components introduces variability in total fluid volume depending on the specific assembly or fill procedure.
- The shift from a fixed 11.2-liter figure in the conventional P300 AWD to the 11.4-11.7-liter range in the MHEV version represents the only capacity variation across all listed E-Pace X540 coolant specifications.