JAC J2

Manual transmission fluid capacity & service interval

JAC J2 manual transmission fluid capacity is 2,1 liters. Service intervals are 40000 km or 24 months. Data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
J2 1.0 VVT MT (2013- )
  • Use: Normal
  • Capacity 2,1 liter
  • Code: 5/1
J2 1.1 VVT AMT (2013- )
  • Use: Normal
  • Capacity 2,1 liter
  • Code: 5/1
J2 1.3 VVT MT, HFC7130WF (2013- )
  • Use: Normal
  • Capacity 2,1 liter
  • Change 40000 km/ 24 months
  • Code: 5/1

Additional Notes

  • The JAC J2 manual transmission fluid capacity is 2.1 liters across all three listed configurations: the 1.0 VVT MT, the 1.1 VVT AMT, and the 1.3 VVT MT (HFC7130WF).
  • A 2.1-liter fill is a service fill figure, representing the amount of fluid required when servicing the transaxle under normal operating conditions rather than a full overhaul drain-and-fill volume.
  • All three configurations are noted as transaxle, manual, meaning the gearbox and differential share a common fluid sump, which is standard practice in front-wheel-drive layouts.
  • A change interval of 40,000 km or 24 months under normal use conditions is specified for the 1.3 VVT MT (HFC7130WF). The dual-trigger format means whichever limit is reached first would govern the service timing.
  • The 1.0 VVT MT and 1.1 VVT AMT rows carry no stated change interval, only a capacity figure, while the 1.3 VVT MT (HFC7130WF) is the sole configuration with a defined replacement schedule in the available specifications.
  • The 1.1 VVT AMT designation refers to an automated manual transmission, which mechanically retains a conventional manual gearbox internals but uses an automated actuation system. The shared 2.1-liter capacity with the fully manual variants reflects that common internal architecture.

Other Systems