INFINITI Q30, H15 (EU)

Manual transmission fluid capacity & service interval

INFINITI Q30, H15 (EU) manual transmission fluid capacity is 2,2 liters. Service intervals are 25000 km or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Q30 1.5d (2018-2018)
  • Use: Normal
  • Capacity 2,2 liter
  • Check 25000 km/ 12 months
  • Code: RS6F30A 6/1
Q30 1.5d (2015-2017)
  • Use: Normal
  • Capacity 2,2 liter
  • Check 25000 km/ 12 months
  • Code: RS6F30A 6/1
Q30 1.6T (115 kW) (2015-2020)
  • Use: Normal
  • Capacity 2,2 liter
  • Check 25000 km/ 12 months
  • Code: RS6F30A 6/1
Q30 1.6T (90 kW) (2015-2020)
  • Use: Normal
  • Capacity 2,2 liter
  • Check 25000 km/ 12 months
  • Code: RS6F30A 6/1

Additional Notes

  • The INFINITI Q30 H15 manual transaxle fluid capacity is 2.2 liters across all four configurations covered in the specifications, spanning the 1.5d diesel and both 1.6T petrol power outputs.
  • A 2.2-liter transaxle fill is a relatively modest volume, consistent with a compact front-wheel-drive or all-wheel-drive transaxle unit where the gearbox and differential share a common fluid sump.
  • The Q30 1.5d covers two separate year groupings in the specifications: 2015-2017 and 2018, both carrying identical 2.2-liter capacity and the same 25,000 km or 12-month check interval under normal use conditions.
  • The 1.6T petrol variant is listed in two distinct power outputs, 115 kW and 90 kW, both for 2015-2020, and both share the same 2.2-liter transaxle capacity and 25,000 km or 12-month check interval under normal use conditions.
  • The check interval of 25,000 km or 12 months, whichever comes first, applies under normal use conditions across all four configurations, meaning the time-based trigger of 12 months can activate before the distance threshold is reached in lower-mileage usage patterns.
  • All four rows are designated as normal use conditions, and the 25,000 km or 12-month interval is tied specifically to a fluid level check rather than a full drain-and-refill service, which is a distinction the specifications make explicit through the term "Check."

Other Systems