IKCO Dena
Manual transmission fluid capacity & service interval
IKCO Dena manual transmission fluid capacity is 1,9 liters. Service intervals include normal use. Data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Dena 1.7 Turbo (2024- ) |
|
| Dena 1.7i (2024- ) |
|
| Dena 1.7 Turbo (2012-2024) |
|
| Dena 1.7i (2012-2024) |
|
Additional Notes
- The IKCO Dena manual transmission fluid specifications cover a transaxle configuration across all listed variants, meaning the transmission and front axle differential share a single fluid reservoir rather than operating as separate units.
- Both the 1.7 Turbo and 1.7i engine variants carry an identical transaxle fluid capacity of 1.9 liters, indicating no differentiation in gearbox size between the turbocharged and naturally aspirated versions of the Dena.
- A 1.9-liter capacity is consistent with a compact transaxle unit, which is typical for front-wheel-drive passenger cars in the Dena's segment, where the gearbox and differential housing are integrated into a relatively compact assembly.
- All four specification rows list normal as the use condition, meaning the stated 1.9-liter fill figure applies to standard operating environments rather than severe-duty cycles such as frequent towing or extreme temperature exposure.
- The 1.7 Turbo variant carries the same 1.9-liter transaxle capacity across the 2012-2024 model range as the 1.7i, confirming that the added mechanical demands of forced induction did not result in a larger or differently sized gearbox housing in the Dena's specification.
- The 2024-onward entries for both the 1.7 Turbo and 1.7i maintain the 1.9-liter transaxle capacity, showing continuity with the figures established in the 2012-2024 rows rather than a revised fill volume for the newer production period.