Hyundai Veloster, JS (USA)

Automatic transmission fluid capacity & service interval

Hyundai Veloster, JS (USA) automatic transmission fluid capacity ranges from 1,9 to 6,7 liters. Service intervals include checks at 24000 miles or 48 months and fluid changes at 60000 or 72000 miles. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Veloster N 2.0 T-GDI, Performance Package (2019-2022)
  • Use: Normal
  • Capacity 3,3-3,4 liter
  • Code: D8LF1/D8F48W 8/1
Veloster 1.6 T-GDI (2018-2022)
  • Use: Normal
  • Capacity 1,9-2 liter
  • Check 24000 miles/ 48 months
  • Code: D7UF1 7/1
Veloster 1.6 T-GDI (2018-2022)
  • Use: Severe
  • Capacity 1,9-2 liter
  • Check 24000 miles/ 48 months
  • Change 72000 miles
  • Code: D7UF1 7/1
Veloster 2.0 MPI (2018-2022)
  • Use: Severe
  • Capacity 6,7 liter
  • Change 60000 miles
  • Code: 6/1

Additional Notes

  • The Hyundai Veloster JS (USA) 2.0 MPI carries a transaxle fluid capacity of 6.7 liters, which is notably larger than the other configurations listed and is consistent with a full automatic transaxle requiring a greater fluid volume to fill the torque converter and valve body in addition to the gear assembly.
  • The 1.6 T-GDI semi-automatic transaxle holds 1.9-2.0 liters of fluid, a range typical of a dual-clutch or similar semi-automatic unit where the fluid circuit is more compact than a conventional automatic.
  • The Veloster N 2.0 T-GDI with the Performance Package carries a transaxle capacity of 3.3-3.4 liters, placing it between the 1.6 T-GDI and the 2.0 MPI in terms of fluid volume for the 2019-2022 model years.
  • For the 1.6 T-GDI under normal use conditions, the specification calls for a fluid check at 24,000 miles or 48 months, with no change interval listed, meaning the service action at that interval is inspection rather than replacement.
  • Under severe use conditions, the 1.6 T-GDI retains the same 24,000-mile or 48-month check interval but adds a fluid change requirement at 72,000 miles, extending the service cycle considerably beyond the inspection point.
  • The 2.0 MPI transaxle under severe use conditions carries a change interval of 60,000 miles, which is shorter than the 72,000-mile change interval specified for the 1.6 T-GDI under the same severe use classification.
  • No service interval data appears for the Veloster N 2.0 T-GDI Performance Package under normal use conditions, as the specification for that configuration contains only the capacity figure of 3.3-3.4 liters.

Other Systems