Hyundai Veloster, FS (EU)

Additional Notes

• The Hyundai Veloster FS (EU) manual transaxle fluid capacity is listed as a range rather than a fixed value across all engine variants, reflecting the tolerance between a drain-and-refill service fill and the full system volume measured during an overhaul or dry fill.
• The 1.6 GDI (103 kW) and 1.6 MPI (95 kW) variants share an identical transaxle fluid capacity range of 1.8–1.9 liters across both the 2011-2014 and 2015-2017 model year groups.
• The 1.6 T-GDI (137 kW) carries a slightly higher transaxle fluid capacity range of 1.9–2.0 liters, a modest increase compared to the naturally aspirated 1.6 GDI and 1.6 MPI variants, consistent with the greater torque load placed on the gearbox by the turbocharged engine.
• Under normal use conditions, all engine variants across both model year groups specify a fluid check interval of 48 months or 60,000 km, with no fluid change interval listed, meaning the fluid is treated as a lifetime fill under those conditions.
• Under severe use conditions, the check interval is expressed as 60,000 km or 48 months for all variants, and a mandatory fluid change at 120,000 km is added — an interval absent from the normal use schedule entirely.
• The capacity figures remain unchanged between the 2011-2014 and 2015-2017 model year groups for every engine variant, indicating no transaxle hardware change affecting fluid volume across the full 2011-2017 production span covered by these specifications.
• The severe use check interval of 60,000 km or 48 months mirrors the normal use interval in duration, but the addition of the 120,000 km change requirement distinguishes severe use as a more demanding maintenance regime rather than simply a more frequent one.