Hyundai Tucson, LM (USA)

Brake fluid capacity & service interval

Hyundai Tucson, LM (USA) models utilize brake fluid with a capacity range of 0,7 to 0,8 liters. Service intervals occur every 30000 miles or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Tucson 2.4 GDI 2WD (2013-2015)
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 30000 miles/ 24 months
Tucson 2.4 GDI 4WD (2013-2015)
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 30000 miles/ 24 months
Tucson 2.0 MPI (2010-2013)
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 30000 miles/ 24 months
Tucson 2.4 MPI 2WD (2010-2013)
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 30000 miles/ 24 months
Tucson 2.4 MPI 4WD (2010-2013)
  • Use: Normal
  • Capacity 0,7-0,8 liter
  • Check 30000 miles/ 24 months

Additional Notes

  • The Hyundai Tucson LM (USA) brake fluid capacity is specified as a range of 0.7-0.8 liter across all listed configurations, which is typical of a reservoir-level service fill rather than a full system overhaul volume.
  • The 2.0 MPI variant covering 2010-2013 lists the hydraulic system as serving both brake and clutch functions, meaning the single fluid reservoir feeds two separate hydraulic circuits.
  • Both the 2.4 MPI 2WD and 2.4 MPI 4WD configurations from 2010-2013 also share the combined brake and clutch hydraulic system designation, aligning with the 2.0 MPI in that regard.
  • The 2.4 GDI variants introduced for 2013-2015 carry a note of hydraulic brake system only, dropping the clutch reference present in the earlier MPI configurations.
  • The 0.7-0.8 liter capacity range applies equally to both the 2WD and 4WD versions of the 2.4 GDI, indicating drivetrain layout has no effect on brake fluid reservoir volume.
  • All five configurations share an identical service interval of every 30,000 miles or 24 months, whichever comes first, under normal use conditions.
  • The 24-month time-based interval reflects the hygroscopic nature of brake fluid, which absorbs moisture over time regardless of mileage accumulation, making the calendar interval as relevant as the distance threshold.
  • The service action specified at the 30,000-mile or 24-month mark is described as a check rather than a replacement, meaning the interval marks an inspection point for fluid condition and level rather than a mandatory flush.

Other Systems