Hyundai Sonata, Y2 (EU)
Manual transmission fluid capacity & service interval
Hyundai Sonata, Y2 (EU) manual transmission fluid capacity ranges from 1,8 to 2,5 liters. Service intervals include checking at 20000 km and changing at 30000 km or 24 months and 40000 km or 24 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Sonata 1.8i (1992-1994) |
|
| Sonata 2.0i (1992-1994) |
|
| Sonata 2.0i 16V (1991-1994) |
|
| Sonata 1.8i (1988-1992) |
|
| Sonata 2.0i (1988-1992) |
|
| Sonata 2.4i (1988-1992) |
|
Additional Notes
- All six manual transaxle configurations in the Hyundai Sonata Y2 (EU) carry a fluid capacity of either 2.5 or 1.8 liters, both of which are typical service fill volumes for a front-wheel-drive manual transaxle unit combining the gearbox and differential in a single housing.
- The 2.0i 16V (1991-1994) stands apart from the other variants with a notably lower transaxle fluid capacity of 1.8 liters, compared to the 2.5-liter figure shared by the 1.8i, 2.0i, and 2.4i engines across their respective model year ranges.
- The 1.8i and 2.0i variants produced between 1988-1992 include a fluid check interval at 20,000 km under normal use conditions, in addition to a full change interval of 40,000 km or 24 months, whichever comes first.
- The 2.4i (1988-1992) follows the same service schedule as the 1.8i and 2.0i from the same period, with a 20,000 km check interval and a 40,000 km or 24-month change interval under normal conditions.
- For the 1.8i and 2.0i variants from 1992-1994, the change interval was reduced to 30,000 km or 24 months under normal use, tightening the mileage threshold by 10,000 km compared to the earlier 1988-1992 specifications for the same engines.
- The 2.0i 16V (1991-1994) shares the 30,000 km or 24-month change interval with the later 1.8i and 2.0i variants, though no separate check interval is listed for any of these three configurations.
- The 24-month time limit appears consistently across all change intervals regardless of engine type or model year range, meaning a calendar-based service trigger applies in parallel with the mileage threshold throughout the entire 1988-1994 production span covered by these specifications.