Hyundai Palisade, LX2 (USA)
Automatic transmission fluid capacity & service interval
Hyundai Palisade, LX2 (USA) automatic transmission fluid capacity is 7 liter. Service intervals require a change every 60000 miles. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Palisade 3.8 GDI (2022- ) |
|
| Palisade 3.8 GDI AWD (2022- ) |
|
| Palisade 3.8 GDI (2019-2022) |
|
| Palisade 3.8 GDI AWD (2019-2022) |
|
Additional Notes
- The Hyundai Palisade LX2 (USA) 3.8 GDI carries a 7-liter automatic transaxle fluid capacity across all listed configurations, which is a service fill figure representing the working fluid volume in a drain-and-refill procedure rather than a full overhaul capacity.
- A 7-liter service fill is a moderately substantial volume for an automatic transaxle, reflecting the fluid demands of an 8-speed unit paired with a larger displacement engine in a three-row SUV platform.
- All four listed configurations share an identical 60,000-mile change interval, and in each case that interval is designated for severe use conditions rather than normal driving cycles.
- Severe use designations typically apply to operating patterns such as frequent towing, stop-and-go traffic, extreme temperature exposure, or trailer hauling, all of which accelerate thermal and oxidative degradation of automatic transmission fluid.
- The FWD 3.8 GDI and the AWD 3.8 GDI variants both carry the same 7-liter capacity, indicating the addition of the AWD system does not alter the transaxle fluid volume in the specifications provided.
- The 2019-2022 and 2022-onward entries for both the FWD and AWD 3.8 GDI share identical capacity and interval figures, meaning the 2022 model year carries the same transaxle fluid specification regardless of which year range entry applies to a given vehicle.