Hyundai KONA, SX2 (EU)

Manual transmission fluid capacity & service interval

Hyundai KONA, SX2 (EU) models utilize manual transmission fluid with a capacity range of 1,5 to 1,6 liters. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

Type	Specifications
KONA 1.0 T-GDI (74 kW) (2024- )	Use: Normal Capacity 1,5-1,6 liter Code: M6CF1 6/1
KONA 1.6 T-GDI (101 kW) (2024- )	Use: Normal Capacity 1,5-1,6 liter Code: M6CF3-1 6/1
KONA 1.0 T-GDI (2023-2024)	Use: Normal Capacity 1,5-1,6 liter Code: M6CF1 6/1
KONA 1.0 T-GDI 48V-Hybrid (2023-2024)	Use: Normal Capacity 1,5-1,6 liter Code: M6CF1 6/1

All four manual transaxle configurations in the Hyundai KONA SX2 (EU) share an identical specified capacity range of 1.5 to 1.6 liters, indicating a consistent transaxle unit across the lineup.
The 1.0 T-GDI variant covering 2023-2024 carries a manual transaxle fluid capacity of 1.5-1.6 liters under normal use conditions.
The 1.0 T-GDI (74 kW) configuration, introduced from 2024, specifies the same 1.5-1.6 liter capacity for the manual transaxle under normal use conditions.
The 1.0 T-GDI 48V-Hybrid variant for 2023-2024 retains a manual transaxle with a 1.5-1.6 liter fluid capacity, meaning the mild hybrid drivetrain does not alter the transmission fluid volume relative to the non-hybrid 1.0 T-GDI.
The 1.6 T-GDI (101 kW) variant, available from 2024, specifies a manual transaxle capacity of 1.5-1.6 liters under normal use conditions, identical to the lower-displacement engines despite the increased power output.
A stated capacity range of 1.5-1.6 liters, rather than a single fixed value, is typical of a service fill specification, where the actual fill level is determined by a level plug rather than a precise measured volume.