Hyundai ix20, JC (EU)

Automatic transmission fluid capacity & service interval

Hyundai ix20, JC (EU) automatic transmission fluid capacity ranges from 6,8 to 7,3 liters. Service intervals include checks at 48 months or 60000 km and fluid changes at 90000 km. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
ix20 1.6 MPI (2015-2019)
  • Use: Normal
  • Capacity 6,8 liter
  • Check 48 months/ 60000 km
  • Code: A4CF1 4/1
ix20 1.6 MPI (2015-2019)
  • Use: Severe
  • Capacity 6,8 liter
  • Change 90000 km
  • Code: A4CF1 4/1
ix20 1.6 MPI (2015-2019)
  • Use: Normal
  • Capacity 7,3 liter
  • Check 48 months/ 60000 km
  • Code: A6GF1 6/1
ix20 1.6 MPI (2015-2019)
  • Use: Severe
  • Capacity 7,3 liter
  • Change 90000 km
  • Code: A6GF1 6/1
ix20 1.6 MPI (2010-2014)
  • Use: Normal
  • Capacity 6,8 liter
  • Check 48 months/ 60000 km
  • Code: A4CF1 4/1
ix20 1.6 MPI (2010-2014)
  • Use: Severe
  • Capacity 6,8 liter
  • Change 90000 km
  • Code: A4CF1 4/1

Additional Notes

  • The Hyundai ix20 JC (EU) 1.6 MPI automatic transaxle carries a fluid capacity of 6.8 liters across both the 2010-2014 and 2015-2019 model year ranges, indicating a consistent fill volume for that configuration.
  • A second capacity figure of 7.3 liters also appears for the 1.6 MPI 2015-2019 automatic transaxle, meaning two distinct fill volumes are specified for the same engine and generation, likely reflecting a difference between transmission variants or overhaul versus service fill procedures.
  • Under normal use conditions, the automatic transaxle on the 1.6 MPI is subject to a fluid check interval of 48 months or 60,000 km, whichever comes first, rather than a full fluid change.
  • Under severe use conditions, the same 1.6 MPI automatic transaxle specifies a fluid change at 90,000 km, which is a replacement rather than an inspection, reflecting the greater stress placed on transmission fluid in demanding operating environments.
  • The normal-use interval for the automatic transaxle is defined as a check rather than a change, which means the fluid is inspected for condition and level at 48 months or 60,000 km rather than being routinely replaced on that schedule.
  • Both the 6.8-liter and 7.3-liter capacity variants of the 2015-2019 1.6 MPI share identical service intervals, with a check at 48 months or 60,000 km under normal use and a change at 90,000 km under severe use.

Other Systems