Hyundai Elantra, MD/UD (USA)

Automatic transmission fluid capacity & service interval

Hyundai Elantra, MD/UD (USA) automatic transmission fluid capacity ranges from 7,1 to 7,3 liters. Service intervals occur at 60000 miles. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Elantra 2.0 GDI (124 kW) (2014-2016)
  • Use: Normal
  • Capacity 7,1 liter
  • Code: A6MF1-1 6/1
Elantra 2.0 GDI (124 kW) (2014-2016)
  • Use: Severe
  • Capacity 7,1 liter
  • Change 60000 miles
  • Code: A6MF1-1 6/1
Elantra 2.0 GDI (129 kW) (2014-2016)
  • Use: Normal
  • Capacity 7,1 liter
  • Code: A6MF1-1 6/1
Elantra 2.0 GDI (129 kW) (2014-2016)
  • Use: Severe
  • Capacity 7,1 liter
  • Change 60000 miles
  • Code: A6MF1-1 6/1
Elantra 1.8 MPI (2011-2016)
  • Use: Normal
  • Capacity 7,3 liter
  • Code: A6GF1 6/1
Elantra 1.8 MPI (2011-2016)
  • Use: Severe
  • Capacity 7,3 liter
  • Change 60000 miles
  • Code: A6GF1 6/1

Additional Notes

  • The Hyundai Elantra MD/UD (USA) 1.8 MPI automatic transaxle carries a fluid capacity of 7.3 liters, which represents a full system fill figure used when servicing the entire unit rather than performing a partial drain-and-fill.
  • The 2.0 GDI variants, covering both the 124 kW and 129 kW output levels for 2014-2016, share an automatic transaxle capacity of 7.1 liters, placing them 0.2 liters below the 1.8 MPI figure.
  • The two 2.0 GDI power outputs — 124 kW and 129 kW — are specified separately yet carry identical automatic transaxle capacities and service intervals, indicating the transmission hardware is shared across those output variants despite the differing engine tuning.
  • A change interval of 60,000 miles is assigned to severe use conditions across all three engine configurations, while no mileage interval appears under normal use conditions for any of them.
  • The 1.8 MPI spans the full 2011-2016 model year range for the MD/UD generation, whereas both 2.0 GDI configurations enter the specification set only from 2014, reflecting a narrower coverage window within the same generation.
  • The severe-use interval of 60,000 miles applies uniformly to the 1.8 MPI, the 2.0 GDI 124 kW, and the 2.0 GDI 129 kW, meaning the change schedule does not vary by engine displacement or output level under demanding operating conditions.

Other Systems