Hyundai Elantra, AD/ADA (USA)
Automatic transmission fluid capacity & service interval
Hyundai Elantra, AD/ADA (USA) automatic transmission fluid capacity ranges from 1,8 to 6,7 liters. Service intervals include checking at 24000 miles or 48 months, and changing at 60000, 72000, or 75000 miles. The data covers 12 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Elantra 1.6 T-GDI (2018-2020) |
|
| Elantra 1.6 T-GDI (2018-2020) |
|
| Elantra 2.0 MPI (2018-2020) |
|
| Elantra 2.0 MPI (2018-2020) |
|
| Elantra 1.4 T-GDI (2017-2020) |
|
| Elantra 1.4 T-GDI (2017-2020) |
|
| Elantra 1.6 T-GDI (2017-2018) |
|
| Elantra 1.6 T-GDI (2017-2018) |
|
| Elantra 2.0 MPI (2017-2017) |
|
| Elantra 2.0 MPI (2017-2017) |
|
| Elantra 2.0 MPI (2016-2016) |
|
| Elantra 2.0 MPI (2016-2016) |
|
Additional Notes
- The semi-automatic transaxles fitted to the 1.4 T-GDI and 1.6 T-GDI engines carry notably small fluid capacities relative to the conventional automatic unit. The 1.4 T-GDI holds 1.8–1.9 liters, while the 1.6 T-GDI holds 1.9–2.0 liters. These figures reflect a service fill volume typical of dual-clutch or automated manual transaxle designs, which use far less fluid than traditional torque-converter automatics.
- The Hyundai Elantra AD/ADA 2.0 MPI automatic transaxle has a capacity of 6.7 liters across all listed model years from 2016-2020. A capacity at that level is consistent with a full overhaul or dry-fill quantity for a conventional torque-converter automatic, meaning a partial drain-and-fill service would use a lower volume in practice.
- Under normal use conditions, the semi-automatic transaxles on the 1.4 T-GDI (2017-2020) and both 1.6 T-GDI configurations call for a fluid check at 24,000 miles or 48 months. A check interval rather than a change interval under normal conditions means the fluid level and condition are inspected, but a full replacement is not necessarily performed at that point.
- Under severe use conditions, the semi-automatic transaxles on the 1.4 T-GDI and 1.6 T-GDI specify a fluid change at 72,000 miles. Severe use typically encompasses conditions such as frequent towing, stop-and-go traffic, or extreme temperature exposure, which accelerate fluid degradation and justify a defined replacement interval.
- The 2.0 MPI automatic transaxle for 2016-2017 model years carries a severe-use fluid change interval of 75,000 miles. For the 2018-2020 model years, the same engine and transaxle combination has a reduced severe-use change interval of 60,000 miles, representing a 15,000-mile difference between the two groups.
- No fluid change interval is listed for the 2.0 MPI automatic transaxle under normal use conditions for any model year from 2016-2020. Only a capacity figure of 6.7 liters appears in those rows, indicating the specifications do not prescribe a scheduled normal-use replacement interval for that transaxle.
- The 1.6 T-GDI semi-automatic transaxle appears across two overlapping year groupings: 2017-2018 and 2018-2020. Both groupings share identical capacity values of 1.9–2.0 liters and the same service intervals, with the 2018 model year present in both ranges.