Hyundai Accent, MC (USA)

Automatic transmission fluid capacity & service interval

Hyundai Accent, MC (USA) automatic transmission fluid capacity is 6,1 liters. Service intervals include checks at 15000 miles or 12 months and 37500 miles or 48 months, with changes at 30000 miles, 60000 miles, and 105000 miles or 84 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Accent 1.6 MPI (2010-2011)
  • Use: Normal
  • Capacity 6,1 liter
  • Check 37500 miles/ 48 months
  • Code: A4AF3 4/1
Accent 1.6 MPI (2010-2011)
  • Use: Severe
  • Capacity 6,1 liter
  • Change 60000 miles
  • Code: A4AF3 4/1
Accent 1.6 MPI (2006-2010)
  • Use: Normal
  • Capacity 6,1 liter
  • Check 15000 miles/ 12 months
  • Change 105000 miles/ 84 months
  • Code: A4AF3 4/1
Accent 1.6 MPI (2006-2010)
  • Use: Severe
  • Capacity 6,1 liter
  • Change 30000 miles
  • Code: A4AF3 4/1

Additional Notes

  • The automatic transaxle fluid capacity for the Hyundai Accent MC (USA) with the 1.6 MPI engine holds 6.1 liters across all listed configurations, covering both the 2006-2010 and 2010-2011 model year groupings.
  • A 6.1-liter figure for an automatic transaxle typically represents a service fill volume, meaning the amount of fluid used during a drain-and-refill service rather than a full overhaul or dry-fill quantity, which is generally higher.
  • For the 1.6 MPI in the 2006-2010 range under normal use conditions, a fluid level check interval is set at 15,000 miles or 12 months, whichever comes first.
  • The normal-use change interval for the 2006-2010 1.6 MPI automatic transaxle is 105,000 miles or 84 months, which equals a seven-year service cycle.
  • Under severe use conditions, the 2006-2010 1.6 MPI automatic transaxle carries a change interval of 30,000 miles, representing a significantly shorter cycle compared to the 105,000-mile normal-use interval for the same configuration.
  • The 2010-2011 1.6 MPI grouping under normal use conditions lists only a check interval of 37,500 miles or 48 months, with no change interval specified in the row data.
  • For the 2010-2011 1.6 MPI under severe use conditions, the change interval is set at 60,000 miles, which is double the 30,000-mile severe-use interval listed for the 2006-2010 grouping.
  • The overlap year of 2010 appears in both the 2006-2010 and 2010-2011 row groupings, indicating that two distinct specification sets apply to certain 2010 model year vehicles depending on production or calibration differences.

Other Systems