Honda Prelude, SH (USA / CAN)
Power steering fluid capacity & service interval
Honda Prelude, SH (USA / CAN) uses power steering fluid with a capacity of 1,2 liters. Service intervals include normal use. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Prelude 2.2 VTEC (CAN) (1996-2001) |
|
| Prelude 2.2 VTEC (USA) (1996-2001) |
|
| Prelude 2.2 VTEC SH (CAN) (1996-2001) |
|
| Prelude 2.2 VTEC SH (USA) (1996-2001) |
|
Additional Notes
- All four configurations of the Honda Prelude and Prelude SH covered in these specifications share an identical power steering fluid capacity of 1.2 liters, applying equally to both the standard VTEC and the SH trim across the 1996-2001 model years.
- The 1.2-liter figure represents a relatively modest system volume, consistent with the compact rack-and-pinion power steering setups commonly found in sport coupes of the era, where reservoir and line capacity is kept minimal.
- Canadian and American market variants of the 2.2 VTEC carry the same 1.2-liter capacity, indicating no regional difference in the power steering system volume between the two markets for either the base or SH trim.
- The SH (Active Torque Transfer System) trim and the standard Prelude trim share the same power steering fluid capacity, meaning the addition of the rear torque transfer hardware on the SH does not alter the front power steering system's fluid volume.
- All rows are designated under normal use conditions, which in fluid service contexts typically refers to standard driving cycles as opposed to severe or high-stress operating environments.