Honda Fit II, GE8 (USA / CAN)

Additional Notes

• The Honda Fit II GE8 1.5 16V cooling system has two distinct capacity values depending on the service context. A dry fill, meaning a completely drained or rebuilt system, takes 4.9 to 5 liters, while a service fill, which accounts for residual fluid remaining in the system, requires only 4.4 to 4.5 liters.
• The difference between the dry fill and service fill capacities on the 1.5 16V is roughly 0.5 liters, which reflects the volume of coolant that typically stays trapped in the engine block, heater core, and hoses during a standard drain procedure rather than a full system flush.
• The Fit EV variant, covering model years 2012-2014, carries a single coolant capacity figure of 3.88 liters. Unlike the 1.5 16V entry, no separate dry fill and service fill values are listed for the EV cooling system.
• The 3.88-liter capacity of the Fit EV cooling system is notably lower than the 4.9 to 5-liter dry fill figure of the 1.5 16V, which is consistent with the EV powertrain having a different thermal management architecture compared to an internal combustion engine.
• Both configurations specify a flexible service interval governed by the on-board maintenance system rather than a fixed mileage or time-based schedule. Under a flexible interval system, the vehicle's computer monitors operating conditions and calculates when service is due based on actual use patterns.