Honda Fit, GD3 (USA / CAN)
Manual transmission fluid capacity & service interval
Honda Fit, GD3 (USA / CAN) manual transmission fluid capacity ranges from 1,5 to 1,6 liters. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Fit 1.5 16V (2007-2008) |
|
Additional Notes
- The Honda Fit GD3 manual transaxle carries a dry fill capacity of 1.6 liters, which represents the total volume required when filling a completely empty or overhauled unit where all fluid has been removed and internal passages are dry.
- The service fill capacity of 1.5 liters applies to routine fluid changes on the 1.5 16V manual transaxle, reflecting the smaller volume needed when some residual fluid remains in the unit after draining.
- The 0.1-liter difference between the dry fill and service fill figures on the 2007-2008 Fit manual transaxle is consistent with the volume of fluid that typically clings to internal components and cannot be fully expelled through a standard drain procedure.
- Both capacity values listed for the 1.5 16V manual transaxle apply under normal use conditions, meaning the specifications are not adjusted for severe driving environments such as frequent towing, extreme temperatures, or stop-and-go operation.