Honda CR-V V, RW1/RW2 (EU)
Coolant capacity & service interval
Honda CR-V V, RW1/RW2 (EU) coolant capacity ranges from 6,2 to 7,6 liters. Service intervals include checks every 20000 km or 12 months, and changes at 100000 km or 60 months, and 200000 km or 120 months. The data covers 8 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| CRV-V 1.5 L PF, RW1 (2018-2021) |
|
| CRV-V 1.5 L PF, RW1 (2018-2021) |
|
| CRV-V 1.5 PF AWD, RW2 (2018-2021) |
|
| CRV-V 1.5 PF AWD, RW2 (2018-2021) |
|
| CRV-V 1.5 VTEC PF, RW1 (2018-2021) |
|
| CRV-V 1.5 VTEC PF, RW1 (2018-2021) |
|
| CRV-V 1.5 VTEC PF AWD, RW2 (2018-2021) |
|
| CRV-V 1.5 VTEC PF AWD, RW2 (2018-2021) |
|
Additional Notes
- Across all Honda CR-V V, RW1/RW2 (EU) 2018-2021 configurations covered here, the cooling system dry fill or overhaul capacity falls within a 7.5-7.6 liter range, reflecting the total volume required when the system is fully drained and refilled from an empty state.
- The RW1 variants, both the 1.5 L PF and 1.5 VTEC PF, list the higher capacity figure as a dry fill, while the RW2 AWD variants label the same 7.5-7.6 liter figure specifically as an overhaul capacity, indicating a distinction in how each drivetrain configuration categorizes a complete system refill.
- Service fill capacity on the RW1 variants is listed as 6.2-6.3 liters, whereas the RW2 AWD variants carry a single fixed value of 6.2 liters, representing a small but noted difference between the two chassis configurations during routine coolant replacement.
- The gap between the service fill and the dry fill or overhaul capacity across all configurations amounts to roughly 1.3-1.4 liters, which corresponds to residual coolant that remains in the system during a standard service drain rather than a complete overhaul procedure.
- All configurations share a coolant check interval of every 20,000 km or 12 months, whichever comes first, applying uniformly regardless of drivetrain or engine variant.
- For subsequent coolant changes following the first, all configurations specify a change interval of 100,000 km or 60 months, meaning routine maintenance after the initial service follows a five-year or 100,000 km cycle.
- The first coolant change interval across all configurations is set at 200,000 km or 120 months, which is double the subsequent change interval in both distance and time, reflecting a longer service life for the factory-fill coolant.