GAC M6 Pro
Automatic transmission fluid capacity & service interval
GAC M6 Pro automatic transmission fluid capacity ranges from 5 to 6,9 liters. Data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
Additional Notes
- The GAC M6 Pro 1.5T carries a dry fill capacity of 6.9 liters for the DCT transaxle, a figure that reflects the total fluid volume required when filling a completely drained or newly assembled unit where no residual fluid remains in the system.
- A service fill capacity of 5 liters applies to the M6 Pro 1.5T under normal use conditions, representing the smaller volume needed during a routine fluid change where some fluid is retained within the torque converter or valve body passages.
- The difference of 1.9 liters between the dry fill and service fill values on the M6 Pro 1.5T DCT transaxle is consistent with the typical residual fluid volume that remains trapped in internal circuits during a standard drain procedure rather than a full overhaul.
- The transaxle on the M6 Pro 1.5T is identified as a semi-automatic DCT, meaning the automatic transmission fluid specified for normal use conditions must be compatible with a dual-clutch design, which relies on fluid for both lubrication and wet-clutch actuation rather than a conventional torque converter alone.