Ford Pinto (USA)
Power steering fluid capacity & service interval
Ford Pinto (USA) uses power steering fluid with a capacity range of 0,15 to 1,1 liters. The data covers 8 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Pinto 2.3 (1980-1980) |
|
| Pinto 2.3 (1980-1980) |
|
| Pinto 2.3 (1977-1979) |
|
| Pinto 2.3 (1977-1979) |
|
| Pinto 2.8 V6 (1976-1979) |
|
| Pinto 2.8 V6 (1976-1979) |
|
| Pinto 2.3 (1974-1976) |
|
| Pinto 2.3 (1974-1976) |
|
Additional Notes
- Across all Ford Pinto (USA) configurations covered from 1974-1980, the power steering system capacity holds at 1.1 liters regardless of engine type or model year, indicating a consistent pump and reservoir assembly shared between the 2.3-liter four-cylinder and the 2.8 V6.
- The steering box is specified as a separate fluid capacity from the power steering pump reservoir, meaning both figures apply simultaneously to a fully equipped power steering system rather than representing alternative fill points.
- For the 2.3-liter engine across the 1974-1976 and 1977-1979 model year groups, the steering box capacity is listed at 0.16 liter, a small volume consistent with the recirculating-ball or worm-and-roller type gearboxes common to passenger cars of that era.
- The 1980 Pinto 2.3 shows a steering box capacity of 0.15 liter, a slight reduction from the 0.16 liter figure recorded for the same engine in earlier model years, representing the only capacity variation across the entire dataset.
- The 2.8 V6 variant, available from 1976-1979, carries the same 0.16 liter steering box capacity as the 2.3-liter engine of the same period, indicating the gearbox unit was not engine-specific.
- All entries across the 1974-1980 range are designated under normal use conditions, meaning the listed capacities apply to standard operating environments without a separate severe-duty specification present in the data.