Ford Ka+, B562 (EU)

Manual transmission fluid capacity & service interval

Ford Ka+, B562 (EU) uses manual transmission fluid with a capacity of 2.3 liters. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Ka+ 1.2 (51 kW), Duratec (2018-2020)
  • Use: Normal
  • Capacity 2,3 liter
  • Code: iB5 5/1
Ka+ 1.2 (63 kW), Duratec (2018-2020)
  • Use: Normal
  • Capacity 2,3 liter
  • Code: iB5 5/1
Ka+ 1.5 TDCi (70 kW) (2018-2019)
  • Use: Normal
  • Capacity 2,3 liter
  • Code: iB5 5/1
Ka+ 1.2 (51 kW), Duratec (2016-2018)
  • Use: Normal
  • Capacity 2,3 liter
  • Code: iB5 5/1
Ka+ 1.2 (63 kW), Duratec (2016-2018)
  • Use: Normal
  • Capacity 2,3 liter
  • Code: iB5 5/1

Additional Notes

  • The Ford Ka+ B562 (EU) manual transaxle fluid capacity is 2.3 liters across all listed engine configurations, covering both the 1.2 Duratec petrol variants and the 1.5 TDCi diesel variant.
  • A 2.3-liter fill volume is consistent with a compact transaxle unit, where the gearbox and final drive share a common fluid sump rather than separate reservoirs.
  • The 1.2 Duratec in 51 kW output carries a 2.3-liter transaxle capacity across both the 2016-2018 and 2018-2020 model year groupings, with no variation between the two periods.
  • The 1.2 Duratec in 63 kW output also holds 2.3 liters across both the 2016-2018 and 2018-2020 ranges, matching the lower-output variant exactly despite the difference in power rating.
  • The 1.5 TDCi (70 kW), spanning 2018-2019, shares the same 2.3-liter transaxle capacity as the petrol-engined configurations, indicating a common gearbox unit is used across the diesel and petrol drivetrains in the Ka+ lineup.
  • All five rows are designated under normal use conditions, meaning the stated 2.3-liter capacity applies to standard operating environments rather than severe-duty or first-change-only scenarios.

Other Systems