Ford Escape, 4th Gen, C2 (USA)
Transfer case fluid capacity & service interval
Ford Escape, 4th Gen, C2 (USA) requires transfer case fluid with a capacity range of 0,3 to 0,5 liters. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Escape 1.5 EcoBoost 4WD (2020-2022) |
|
| Escape 2.0 EcoBoost 4WD (2020-2022) |
|
Additional Notes
- Both the 1.5 EcoBoost 4WD and the 2.0 EcoBoost 4WD configurations share an identical transfer case fluid capacity range of 0.3–0.5 liter for the 2020-2022 model years.
- The 0.3–0.5 liter capacity range is characteristic of a compact transfer case unit, reflecting the relatively small fluid volume required to lubricate the internal gears and clutch components in a vehicle of this class.
- The capacity is expressed as a range rather than a fixed value, which is common for transfer cases where the exact fill level depends on the drain angle of the vehicle and the position of the fill port during service.
- Both rows are designated under normal use conditions, meaning the specified capacity applies to standard operating environments rather than severe-duty or off-road-intensive service.
- No service interval mileage or time figure is listed alongside the capacity data for either engine configuration, as the specifications provided contain only fluid volume information for the transfer case.