Ford Escape, 2nd Gen (USA)

Additional Notes

• All manual transaxle configurations across the Ford Escape 2nd Gen (USA) share a uniform fluid capacity of 2.3 liters, covering the 2.5 16V four-cylinder, the 3.0 V6, and the 3.0 V6 FlexFuel variants from 2009-2012.
• A 2.3-liter transaxle fill is consistent with a service-fill specification, representing the amount of fluid required during a routine drain-and-refill rather than a full overhaul or assembly fill.
• The 2.5 16V for 2009-2011 carries no fluid change interval in the specifications, while the same engine for 2012 includes both a normal and a severe service interval, indicating a difference in documented service guidance between those model year groups.
• Under normal use conditions, the 2012 2.5 16V transaxle fluid change interval is set at 150,000 miles, a figure that also applies to the 3.0 V6 and 3.0 V6 FlexFuel across both the 2009-2011 and 2012 model year groups.
• Under severe use conditions, the change interval drops sharply to 30,000 miles or 3 months for all configurations that carry a severe-use rating, including the 3.0 V6, 3.0 V6 FlexFuel for 2009-2011, and all three engine variants for 2012.
• The 30,000-mile or 3-month severe-use interval reflects a time-or-distance threshold, meaning whichever limit is reached first would trigger a fluid change under that classification.
• The gap between the 150,000-mile normal interval and the 30,000-mile severe interval represents a fivefold difference in service frequency, which is consistent with how severe-duty classifications account for elevated thermal and mechanical stress on transmission fluid.
• The 3.0 V6 FlexFuel variant follows the same capacity and interval structure as the standard 3.0 V6 across both the 2009-2011 and 2012 model year groups, with no deviation in any of the listed specifications.