Ford Capri MK II (EU)

Brake fluid capacity & service interval

Ford Capri MK II (EU) brake fluid specifications include a capacity range of 0.4 to 0.42 liters. The data covers 7 different configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Capri (1.3 - HC) (1974-1978)
  • Use: Normal
  • Capacity 0,4 liter
Capri (1.6 - GT) (1974-1978)
  • Use: Normal
  • Capacity 0,4 liter
Capri (1.6 - HC) (1974-1978)
  • Use: Normal
  • Capacity 0,4 liter
Capri (2.0 - HC V6) (1974-1978)
  • Use: Normal
  • Capacity 0,42 liter
Capri (2.0 - HC) (1974-1978)
  • Use: Normal
  • Capacity 0,4 liter
Capri (2.3 - HC) (1974-1978)
  • Use: Normal
  • Capacity 0,4 liter
Capri (3.0 - HC) (1974-1978)
  • Use: Normal
  • Capacity 0,4 liter

Additional Notes

  • Across the Ford Capri MK II (EU) lineup covering 1974-1978, the hydraulic brake system capacity is specified at 0.4 liter for the majority of engine variants, including the 1.3 HC, 1.6 GT, 1.6 HC, 2.0 HC, 2.3 HC, and 3.0 HC configurations.
  • The 2.0 HC V6 variant carries a slightly higher brake fluid capacity of 0.42 liter, making it the sole exception among the seven listed configurations. In hydraulic brake systems, small capacity differences of this kind typically reflect minor variations in the total volume of the brake lines, master cylinder, and caliper or wheel cylinder circuits.
  • All seven configurations share the same use condition designation of normal, meaning the 0.4 liter and 0.42 liter figures apply under standard operating conditions rather than a severe or modified service regime.
  • The 0.4 liter figure represents a relatively modest total system volume, consistent with the compact brake circuit architecture typical of European passenger cars from the mid-1970s. Brake fluid capacity at this level reflects the combined fill of the master cylinder reservoir and the hydraulic lines running to each wheel.
  • The uniform 0.4 liter capacity across variants spanning a wide displacement range, from the 1.3-liter four-cylinder to the 3.0-liter six-cylinder, indicates that the brake hydraulic circuit layout remained largely consistent across the Capri MK II range regardless of engine size.

Other Systems