Ford Bronco Sport (USA)

Coolant capacity & service interval

Ford Bronco Sport (USA) coolant capacity ranges from 7,5 to 8,5 liters. Service intervals include 100000 miles or 60 months and 200000 miles or 120 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Bronco Sport 1.5 EcoBoost 4WD (2021- )
  • Use: Normal
  • Capacity 7,5 liter
  • Change 100000 miles/ 60 months
Bronco Sport 1.5 EcoBoost 4WD (2021- )
  • Use: First change only
  • Capacity 7,5 liter
  • Change 200000 miles/ 120 months
Bronco Sport 2.0 EcoBoost 4WD (2021- )
  • Use: Normal
  • Capacity 8,5 liter
  • Change 100000 miles/ 60 months
Bronco Sport 2.0 EcoBoost 4WD (2021- )
  • Use: First change only
  • Capacity 8,5 liter
  • Change 200000 miles/ 120 months

Additional Notes

  • The Ford Bronco Sport (USA) cooling system specifications cover two engine variants: the 1.5 EcoBoost 4WD and the 2.0 EcoBoost 4WD, both introduced in 2021.
  • The 1.5 EcoBoost 4WD carries a cooling system capacity of 7.5 liters, while the 2.0 EcoBoost 4WD holds 8.5 liters, reflecting the larger displacement engine's greater thermal management demands.
  • Under normal use conditions, both engine variants share the same coolant change interval of 100,000 miles or 60 months, whichever comes first.
  • A first change only interval is listed separately for both variants at 200,000 miles or 120 months. A first change only designation typically applies to the factory-fill coolant, which is formulated to last longer before the initial service compared to subsequent refills.
  • The 1.5 EcoBoost 4WD retains the same 7.5-liter capacity regardless of whether the interval is normal or first change only, indicating the capacity figure reflects the full cooling system volume rather than a partial service amount.
  • The same relationship holds for the 2.0 EcoBoost 4WD, where the 8.5-liter capacity is consistent across both use conditions, pointing to a full system drain-and-fill procedure in either service scenario.