Ford B-MAX (EU)
Automatic transmission fluid capacity & service interval
Ford B-MAX (EU) automatic transmission fluid capacity ranges from 1,5 to 1,8 liters. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| B-Max 1.6 Ti-VCT (2012-2018) |
|
Additional Notes
- The Ford B-MAX 1.6 Ti-VCT carries a dry fill capacity of 1.8 liters, which represents the total fluid volume required when filling a completely drained or newly assembled transaxle with no residual fluid present.
- The service fill capacity of 1.5 liters applies to routine fluid changes on the 1.6 Ti-VCT, where some fluid remains in the torque converter or passages even after draining, reducing the amount needed to return the system to the correct operating level.
- The 0.3-liter difference between the dry fill and service fill figures on the 1.6 Ti-VCT reflects the volume of fluid that typically cannot be evacuated through a standard drain procedure alone.
- The transmission in the 1.6 Ti-VCT is classified as a semi-automatic transaxle, meaning the fluid capacity values listed apply to a unit that combines the gearbox and differential in a single housing with automated clutch actuation rather than a conventional torque converter automatic.
- Both the 1.8-liter dry fill and 1.5-liter service fill specifications for the 1.6 Ti-VCT are associated with normal use conditions, indicating the listed intervals and capacities are not adjusted for severe driving cycles such as towing, extreme temperatures, or frequent short trips.