Fiat Multipla, 186 (EU)
Coolant capacity & service interval
Fiat Multipla, 186 (EU) coolant capacity ranges from 6,3 to 7 liters. Service intervals require a check every 20000 km. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Multipla 1.6 16V (2001-2010) |
|
| Multipla 1.9 JTD (81 kW) (2000-2001) |
|
| Multipla 1.6 16V (1998-2001) |
|
| Multipla 1.9 JTD (77 kW) (1998-2000) |
|
Additional Notes
- The Fiat Multipla 186 1.6 16V carries a cooling system capacity of 7 liters, which is the larger of the two capacity figures listed across all configurations in the specifications.
- The 1.6 16V engine maintains the same 7-liter cooling system capacity across both its 1998-2001 and 2001-2010 production periods, with no change in fill volume between the two generations of that variant.
- Both 1.9 JTD variants, the 77 kW (1998-2000) and the 81 kW (2000-2001), share a cooling system capacity of 6.3 liters, placing them 0.7 liters below the 1.6 16V figure despite being diesel engines of greater output.
- A 6.3-liter cooling system capacity, as seen on the 1.9 JTD variants, reflects the total fluid volume held within the engine block, cylinder head passages, radiator, and reservoir combined at a full service fill.
- All four configurations in the specifications share a uniform coolant check interval of 20,000 km under normal use conditions, applying equally to both the petrol and diesel engine variants across all listed model years.
- The 20,000 km check interval listed for each configuration represents a fluid level and condition inspection point rather than a full coolant replacement interval, as the specification designates the service type as a check rather than a drain and refill.