Fiat Linea, 323 (EU)

Automatic transmission fluid capacity & service interval

Fiat Linea, 323 (EU) requires automatic transmission fluid with a capacity of 1,6 liters. Service intervals include normal use. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Linea 1.3 Multijet 16V (66 kW) (2010-2014)
  • Use: Normal
  • Capacity 1,6 liter
  • Code: M20 6/1
Linea 1.3 Multijet 16V (66 kW) (2007-2010)
  • Use: Normal
  • Capacity 1,6 liter
  • Code: M20 6/1
Linea 1.3 Multijet 16V (66 kW) DPF (2007-2010)
  • Use: Normal
  • Capacity 1,6 liter
  • Code: M20 6/1

Additional Notes

  • The Fiat Linea 323 (EU) 1.3 Multijet 16V (66 kW) uses a transaxle semi-automatic transmission, meaning the gearbox and differential share a single housing, which accounts for the combined fluid volume serviced in one fill.
  • A capacity of 1.6 liters applies uniformly across the 1.3 Multijet 16V (66 kW) variants covering the 2007-2010 production period, including both the standard and DPF-equipped configurations.
  • The 1.3 Multijet 16V (66 kW) in the 2010-2014 period carries the same 1.6-liter capacity as the earlier generation, indicating no change in transmission fluid volume between the two production spans.
  • All three listed configurations specify normal use conditions, which in transmission service contexts generally refers to standard driving cycles without sustained heavy loads, towing, or extreme temperature exposure.
  • The 1.6-liter figure represents a relatively modest fluid volume, consistent with compact transaxle semi-automatic units where the combined gearbox and differential cavity is smaller than in separate transmission and axle arrangements.

Other Systems