Fiat 130 (EU)
Automatic transmission fluid capacity & service interval
Fiat 130 (EU) uses automatic transmission fluid with a capacity range of 8 to 10 liters. Service intervals include a check every 5000 km. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 130 3200 (1971-1977) |
|
| 130 Coupé, BC (1971-1977) |
|
| 130 2900 (119 kW) (1970-1971) |
|
| 130 2900 (103 kW) (1969-1970) |
|
Additional Notes
- The Fiat 130 (EU) automatic transmission fluid capacity splits into two distinct values across the model range: 8 liters for the 2900 variants and 10 liters for the 3200 and Coupé BC variants.
- The 130 2900 (103 kW) covering 1969-1970 and the 130 2900 (119 kW) covering 1970-1971 both share an 8-liter automatic transmission fluid capacity, despite differing in power output.
- A 10-liter automatic transmission fluid capacity applies to the 130 3200 and the 130 Coupé BC, both spanning 1971-1977, representing a 25 percent increase over the 2900 variants.
- All four configurations carry a normal use condition, meaning the specified capacities and check intervals reflect standard operating circumstances rather than severe or demanding duty cycles.
- A 5000 km check interval is uniform across all configurations in the range, from the 1969 2900 through to the 1977 Coupé BC, regardless of engine displacement or power rating.
- The 8-liter figure associated with the 2900 variants is a service fill capacity for the automatic transmission, indicating the fluid volume required during a standard fluid service rather than a full overhaul with a dry fill.
- The 10-liter capacity on the 3200 and Coupé BC similarly represents a service fill value, with the larger volume consistent with the greater transmission size accompanying the increased engine displacement from 2900 cc to 3200 cc.