Fiat 1100, 103 (EU)
Brake fluid capacity & service interval
Fiat 1100, 103 (EU) brake fluid capacity ranges from 0,3 to 0,78 liters. Service intervals include checks at 2500 km, 5000 km, and 10000 km. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 1100H, 103S (1967-1969) |
|
| 1100R, 103P (1966-1969) |
|
| 1100D, 103G.1 (1962-1966) |
|
| 1100, 103D (1957-1962) |
|
| 1100, 103G/H (1957-1962) |
|
| 1100, 103E (1953-1957) |
|
Additional Notes
- The Fiat 1100 103D and 103E variants share an identical hydraulic brake system fluid capacity of 0.78 liter, which is notably higher than the 0.3–0.31 liter figures seen across the later 103G/H, 103G.1, 103S, and 103P variants. A larger total system capacity generally reflects a greater volume of brake lines, cylinders, or reservoir size in the hydraulic circuit.
- The 103E (1953-1957) and 103D (1957-1962) both specify a check interval of 5000 km under normal use conditions, paired with the same 0.78 liter capacity, indicating a consistent brake system specification across those two consecutive variants.
- The 103G/H (1957-1962) carries a capacity of 0.3 liter with a 5000 km check interval, while the mechanically related 103G.1 (1962-1966) retains the same 0.3 liter capacity but shortens the check interval significantly to 2500 km. A halved service interval on an otherwise similar capacity figure points to a tighter maintenance schedule applied to the 103G.1 under normal use conditions.
- The 1100D 103G.1 (1962-1966) has the shortest brake fluid check interval across all listed variants at 2500 km under normal use, making fluid condition monitoring for that variant more frequent than any other in the 1100 103 range.
- The 1100H 103S (1967-1969) and 1100R 103P (1966-1969) share identical specifications: a capacity of 0.31 liter and a check interval of 10000 km under normal use conditions. The 10000 km interval is the longest across all six variants, reflecting a less frequent inspection schedule for the hydraulic brake system on those later models.
- The capacity difference between the 103G/H at 0.3 liter and the 103S and 103P at 0.31 liter is marginal at 0.01 liter, a difference that falls within typical measurement rounding for hydraulic brake system specifications and is unlikely to reflect a meaningful mechanical distinction between those variants.