Ferrari F12
Automatic transmission fluid capacity & service interval
Ferrari F12 automatic transmission fluid capacity ranges from 3,5 to 7,75 liters. Service intervals include checks at 20000 km or 12 months and changes at 100000 km. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
Additional Notes
- The Ferrari F12 Berlinetta (2012-2017) uses a semi-automatic transaxle, meaning the gearbox and clutch assembly are housed together at the rear axle rather than at the engine, a layout common in high-performance rear-engined and mid-engined Ferrari models.
- The transaxle on the F12 Berlinetta is serviced in two distinct fluid circuits: a clutch part and a gear part, each carrying separate capacity and interval specifications.
- The clutch part of the F12 Berlinetta transaxle holds 7.75 liters of fluid under normal use conditions, a notably large volume that reflects the wet-clutch design typical of Ferrari's dual-clutch semi-automatic systems, where the clutch pack is bathed in fluid for cooling and lubrication.
- The gear part of the F12 Berlinetta transaxle holds 3.5 liters under normal use conditions, a more modest figure consistent with the lubrication demands of the gear set alone rather than the full clutch assembly.
- Both the clutch part and gear part of the F12 Berlinetta transaxle share a check interval of 20,000 km or 12 months under normal use, whichever comes first, meaning fluid condition and level are to be inspected on an annual basis at minimum.
- A fluid change interval of 100,000 km is specified for the gear part of the F12 Berlinetta transaxle under normal use conditions, while no change interval appears for the clutch part in the same specifications.
- The F12tdf (2015-2017) carries identical transaxle fluid capacities to the F12 Berlinetta, with 7.75 liters for the clutch part and 3.5 liters for the gear part under normal use conditions.
- The F12tdf transaxle shares the same check interval of 20,000 km or 12 months for both the clutch part and gear part under normal use, and the gear part likewise carries a 100,000 km change interval.