Ferrari 812
Automatic transmission fluid capacity & service interval
Ferrari 812 uses automatic transmission fluid with a capacity range of 3,5 to 7,75 liters. Service intervals include checks at 20000 km or 12 months and changes at 100000 km. The data covers 8 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The Ferrari 812 lineup uses a transaxle-mounted semi-automatic transmission, which splits fluid servicing into two distinct sections: a clutch part and a gear part, each with separate capacity figures.
- The clutch part of the transaxle holds 7.75 liters across all four 812 variants, covering the 812 Competizione, 812 Competizione A, 812 GTS, and 812 Superfast.
- The gear part of the transaxle carries a capacity of 3.5 liters, a notably smaller volume than the clutch section, reflecting the different mechanical demands of the gearset relative to the clutch assembly.
- A fluid change interval of 100,000 km under normal use conditions is specified for the clutch part across all listed variants, while no change interval appears for the gear part in any of the rows.
- Both the clutch part and the gear part share a check interval of every 20,000 km or 12 months, whichever comes first, under normal use conditions.
- The 812 Superfast covers model years 2017-2021, while the 812 GTS spans 2019-2024, meaning there is a period of overlap between 2019 and 2021 where both variants were in production simultaneously with identical fluid capacities and service intervals.
- The 812 Competizione and 812 Competizione A both carry the same 2021-2024 model year range and share identical capacity and interval specifications, with the A designation indicating the open-top spider variant rather than any difference in transmission servicing requirements.