DS DS 4, N
Power steering fluid capacity & service interval
DS DS 4, N power steering fluid capacity ranges from min to max. Service intervals include normal use. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| DS 4 1.6 THP 150, 5FE (2015-2018) |
|
| DS 4 1.6 THP 160, 5FM (2015-2018) |
|
| DS 4 1.6 THP 165, 5GZ (2015-2018) |
|
| DS 4 1.6i VTI 16V, 5FS (2015-2018) |
|
Additional Notes
- Across all four engine variants of the DS 4 N covered for 2015-2018, the power steering fluid specification is expressed as a fill level rather than a fixed volume, with the accepted range defined as between the minimum and maximum marks on the reservoir.
- A level-based specification of this kind indicates a top-up or inspection service rather than a full fluid exchange, meaning no discrete capacity figure in liters or quarts is associated with normal servicing.
- The 1.6 THP family spans three distinct engine codes across the 2015-2018 range: the 5FE rated at 150 hp, the 5FM at 160 hp, and the 5GZ at 165 hp, yet all three share an identical power steering fluid fill specification.
- The naturally aspirated 1.6i VTI 16V with engine code 5FS also carries the same between-minimum-and-maximum specification, placing all four configurations on equal footing for power steering fluid service.
- All four rows are designated under normal use conditions, meaning the level-based fill specification applies to standard operating environments without a separate interval or capacity defined for severe use.