Dodge Avenger, JS (EU)
Brake fluid capacity & service interval
Dodge Avenger, JS (EU) models utilize brake fluid with a capacity range between min and max. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Avenger 2.0 16V (2007-2010) |
|
| Avenger 2.4 16V (125 kW) (2007-2010) |
|
| Avenger 2.4 16V (129 kW) (2007-2010) |
|
| Avenger 2.7 V6 (2007-2010) |
|
| Avenger 2.7 V6 Flex-Fuel (139 kW) (2007-2010) |
|
| Avenger 2.7 V6 Flex-Fuel (141 kW) (2007-2010) |
|
Additional Notes
- Across all Dodge Avenger JS (EU) variants from 2007-2010, brake fluid capacity for the hydraulic brake system is specified as "between min and max," meaning the reservoir should be filled to a level within the marked minimum and maximum indicators on the reservoir body rather than to a fixed volume measurement.
- The "between min and max" specification applies under normal use conditions across every listed engine variant, from the 2.0 16V four-cylinder through to the 2.7 V6 configurations.
- The 2.4 16V engine appears in two distinct output ratings for the 2007-2010 period, at 125 kW and 129 kW, yet both share the same brake fluid reservoir fill specification, indicating the hydraulic brake system design is consistent across those two variants despite the power difference.
- The 2.7 V6 similarly spans two Flex-Fuel variants rated at 139 kW and 141 kW respectively, alongside a non-Flex-Fuel 2.7 V6, all carrying the same hydraulic brake system fill specification for the 2007-2010 model years.
- Brake fluid reservoirs using a min-to-max range rather than a precise fill volume account for fluid level changes caused by brake pad wear over time, as worn pads allow calipers to extend further, drawing fluid from the reservoir and lowering the level toward the minimum mark.