Citroën Grand C4 Picasso
Brake fluid capacity & service interval
The Citroën Grand C4 Picasso uses brake fluid with a capacity range between minimum and maximum values. Four configurations of the model are covered in the data.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Grand C4 Picasso 2.0 HDi DPF (110 kW), RHE (2012-2013) |
|
| Grand C4 Picasso 2.0 HDi DPF (120 kW), RHH (2012-2013) |
|
| Grand C4 Picasso 2.0 HDi DPF (110 kW), RHE (2008-2011) |
|
| Grand C4 Picasso 2.0 HDi DPF (120 kW), RHH (2008-2011) |
|
Additional Notes
- All four configurations listed for the Grand C4 Picasso share the same fill specification: fluid level must sit between the minimum and maximum marks on the reservoir. A reading outside either boundary signals an incorrect fill amount.
- The 2.0 HDi DPF (110 kW) RHE engine appears across two distinct year groupings, 2008-2011 and 2012-2013, both carrying identical brake fluid level requirements under normal use conditions.
- The 2.0 HDi DPF (120 kW) RHH engine follows the same pattern, with the 2008-2011 and 2012-2013 groupings each specifying the same between-min-and-max fill range under normal use conditions.
- All entries are designated for the hydraulic brake system specifically, meaning the specification applies to the conventional hydraulic circuit rather than any auxiliary or electronic braking component.
- Normal use conditions apply uniformly across all four configurations, indicating no separate severe-duty interval or fill variation is specified for either engine variant within the 2008-2013 period.