Citroën C4 Picasso

Brake fluid capacity & service interval

Citroën C4 Picasso requires brake fluid with a capacity range defined by min and max levels. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
C4 Picasso 2.0 HDi DPF (110 kW), RHE (2012-2013)
  • Use: Normal
  • Between min and max.
C4 Picasso 2.0 HDi DPF (120 kW), RHH (2012-2013)
  • Use: Normal
  • Between min and max.
C4 Picasso 2.0 HDi DPF (110 kW), RHE (2009-2011)
  • Use: Normal
  • Between min and max.
C4 Picasso 2.0 HDi DPF (120 kW), RHH (2009-2011)
  • Use: Normal
  • Between min and max.

Additional Notes

  • All four configurations — the 2.0 HDi DPF RHE at 110 kW and the RHH at 120 kW, across both the 2009-2011 and 2012-2013 model year splits — share the same brake fluid level specification of between minimum and maximum on the reservoir.
  • The "between min and max" specification applies to the hydraulic brake system under normal use conditions, meaning the level is assessed as part of routine maintenance rather than a post-overhaul refill measurement.
  • The RHE engine code denotes the 110 kW variant of the 2.0 HDi DPF, while the RHH denotes the higher-output 120 kW variant. Despite the difference in power output, both share identical brake fluid level requirements across the same model year ranges.
  • The model year split at 2012 appears across both engine variants, dividing the 2009-2013 coverage into two distinct sub-ranges. The brake fluid specification remains consistent across both sub-ranges for each engine code.

Other Systems