Chrysler Sebring, JR (USA / CAN)
Manual transmission fluid capacity & service interval
Chrysler Sebring, JR (USA / CAN) requires manual transmission fluid with a capacity of 2,4 liters. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Sebring 2.4 16V (CAN) (2003-2006) |
|
| Sebring 2.4 16V (USA) (2003-2006) |
|
| Sebring 2.0 16V (USA) (2000-2006) |
|
| Sebring 2.7 V6 24V (CAN) (2000-2006) |
|
| Sebring 2.7 V6 24V (USA) (2000-2006) |
|
Additional Notes
- The Chrysler Sebring JR manual transaxle fluid capacity is 2.4 liters across all listed engine configurations, covering the 2.0 16V, 2.4 16V, and 2.7 V6 24V variants for both USA and CAN markets in the 2000-2006 period.
- A transaxle combines the transmission and differential into a single unit, and a 2.4-liter fluid capacity is a typical service fill volume for a front-wheel-drive manual transaxle of this class.
- All five configurations carry a normal use condition designation, meaning the 2.4-liter capacity figure applies under standard operating circumstances rather than severe or first-change-only conditions.
- The 2.0 16V engine variant is listed exclusively for the USA market, with a model year span of 2000-2006, while the 2.4 16V engine appears in both USA and CAN market entries, each starting from 2003-2006.
- The 2.7 V6 24V is the only engine configuration represented in both USA and CAN market rows with an identical 2000-2006 span, and both share the same 2.4-liter transaxle fluid capacity.
- The 2.4 16V entries for USA and CAN markets begin in 2003, whereas the 2.0 16V USA and 2.7 V6 24V entries for both markets begin in 2000, reflecting a difference in when certain engine options were introduced within the JR generation.