Chrysler Pacifica, RU (USA / CAN)

Additional Notes

• The Chrysler Pacifica RU 3.6 V6 cooling system carries a capacity range of 12.4-14.2 liters, and a range rather than a fixed value typically reflects variation between a service fill and a full drain-and-refill overhaul procedure.
• The same 12.4-14.2 liter capacity range applies equally to the standard 3.6 V6, the FlexFuel variant, and both AWD configurations, meaning the drivetrain layout and fuel system type do not alter the cooling system fill specification.
• The AWD configurations, both standard and FlexFuel, share an introduction year of 2019, while the standard and FlexFuel front-wheel-drive variants carry a starting year of 2016, reflecting a three-year gap in the availability of all-wheel-drive within the Pacifica RU lineup.
• All non-hybrid and hybrid engine cooling circuits share the same service interval of 150,000 miles or 120 months under normal use conditions, with 120 months equating to a 10-year replacement cycle.
• The Pacifica Hybrid 3.6 V6 engine cooling system holds a fixed capacity of 13.7 liters, which falls within the 12.4-14.2 liter range seen on non-hybrid variants but is stated as a single value rather than a range.
• The Pacifica Hybrid carries three separate cooling circuits, each with its own capacity specification: 13.7 liters for the engine, 4.0-4.7 liters for the battery, and 3.5 liters for the power electric system, indicating that the hybrid platform requires independent thermal management for each major powertrain component.
• The battery cooling circuit on the Pacifica Hybrid is specified as a range of 4.0-4.7 liters, while the power electric cooling circuit is a fixed 3.5 liters, showing that fill variability is present in one auxiliary circuit but not the other.
• Across all three Pacifica Hybrid cooling circuits, the 150,000-mile or 120-month change interval under normal use conditions is uniform, meaning no single circuit demands more frequent service than the others.