Chrysler Delta (EU)

Automatic transmission fluid capacity & service interval

Chrysler Delta (EU) requires automatic transmission fluid with a capacity range of 1,85 to 2,55 liters. Service intervals require a check every 35000 km. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Delta 1.6 16V Mjet (77 kW) (2011-2014)
  • Use: Normal
  • Capacity 2,55 liter (Dry fill)
  • Capacity 1,85 liter (Service fill)
  • Check 35000 km
  • Code: C544 6/1
Delta 1.6 16V Mjet (85 kW) (2011-2014)
  • Use: Normal
  • Capacity 2,55 liter (Dry fill)
  • Capacity 1,85 liter (Service fill)
  • Check 35000 km
  • Code: C544 6/1
Delta 1.6 16V Mjet (85 kW) (2011-2014)
  • Use: Normal
  • Capacity 1,9 liter
  • Check 35000 km
  • Code: C635 DDCT 6/1
Delta 1.6 16V Mjet (88 kW) (2011-2014)
  • Use: Normal
  • Capacity 2,55 liter (Dry fill)
  • Capacity 1,85 liter (Service fill)
  • Check 35000 km
  • Code: C544 6/1
Delta 1.6 16V Mjet (88 kW) (2011-2014)
  • Use: Normal
  • Capacity 1,9 liter
  • Check 35000 km
  • Code: C635 DDCT 6/1
Delta 2.0 16V Mjet (120 kW) (2011-2014)
  • Use: Normal
  • Capacity 1,9 liter
  • Code: C635 DDCT 6/1
Delta 2.0 16V Mjet (121 kW) (2011-2014)
  • Use: Normal
  • Capacity 1,9 liter
  • Check 35000 km
  • Code: C635 DDCT 6/1

Additional Notes

  • The Chrysler Delta (EU) semi-automatic transaxle configurations across the 2011-2014 model years all share a common check interval of 35,000 km under normal use conditions, where such an interval is listed in the specifications.
  • Two distinct capacity figures appear across the 1.6 16V Mjet variants: a dry fill of 2.55 liters and a service fill of 1.85 liters. The dry fill represents the total fluid volume required when filling a completely empty or overhauled unit, while the service fill reflects the smaller volume needed when fluid is only partially drained during a routine service.
  • The gap between the 2.55-liter dry fill and the 1.85-liter service fill on the 1.6 16V Mjet transaxle indicates that approximately 0.70 liters of fluid remains in the unit during a standard drain-and-fill service, which is typical of semi-automatic transaxles where the torque converter or internal passages retain fluid.
  • A separate capacity figure of 1.9 liters appears for certain 1.6 16V Mjet configurations alongside the dry/service fill split entries. The 1.9-liter figure carries no dry or service fill designation in the specifications, making it a standalone capacity value distinct from the two-figure entries.
  • The 1.6 16V Mjet at 85 kW and the 1.6 16V Mjet at 88 kW each have two separate specification rows: one listing the 2.55-liter dry fill and 1.85-liter service fill, and another listing only the 1.9-liter capacity. Both rows for each power output share the same 35,000 km check interval under normal use.
  • The 2.0 16V Mjet at 120 kW carries a 1.9-liter capacity with no check interval listed in the specifications, while the 2.0 16V Mjet at 121 kW shares the same 1.9-liter capacity and includes the 35,000 km check interval.
  • All seven specification rows across the Delta (EU) 2011-2014 automatic transmission fluid entries are designated for normal use conditions, meaning no separate severe-use intervals or capacities are present in the specifications.

Other Systems