Chrysler Aspen, HG (USA / CAN)

Coolant capacity & service interval

Chrysler Aspen, HG (USA / CAN) coolant capacity ranges from 13,5 to 15,8 liters. Service intervals require a change every 102000 miles or 60 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Aspen 4.7 V8 (USA) (2006-2009)
  • Use: Normal
  • Capacity 13,5 liter
  • Change 102000 miles/ 60 months
Aspen 4.7 V8 AWD (USA) (2006-2009)
  • Use: Normal
  • Capacity 13,5 liter
  • Change 102000 miles/ 60 months
Aspen 5.7 HEMI V8 (USA) (2006-2009)
  • Use: Normal
  • Capacity 15,8 liter
  • Change 102000 miles/ 60 months
Aspen 5.7 HEMI V8 AWD (USA) (2006-2009)
  • Use: Normal
  • Capacity 15,8 liter
  • Change 102000 miles/ 60 months

Additional Notes

  • The Chrysler Aspen 4.7 V8 cooling system holds 13.5 liters, a figure that applies equally to both the rear-wheel-drive and AWD variants of the 4.7-liter engine across the 2006-2009 model years.
  • The 5.7 HEMI V8 configurations carry a noticeably larger cooling system capacity of 15.8 liters, reflecting the greater displacement and thermal output of the HEMI engine compared to the 4.7 V8.
  • As with the 4.7 V8, the AWD drivetrain on the 5.7 HEMI V8 does not alter the cooling system capacity, which remains at 15.8 liters regardless of drivetrain configuration.
  • All four configurations share an identical coolant change interval of 102,000 miles or 60 months under normal use conditions, placing the service interval on a roughly five-year or six-figure mileage cycle, whichever comes first.
  • The difference in cooling system capacity between the 4.7 V8 and the 5.7 HEMI V8 amounts to 2.3 liters, a gap that would be relevant when calculating the volume of coolant required for a full system drain and refill.