Chery Tiggo 7
Automatic transmission fluid capacity & service interval
Chery Tiggo 7 automatic transmission fluid capacity ranges from 1,1 to 4,5 liters for dry fill. Service intervals include normal use. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Tiggo 7 1.6 TGDI AWD (110 kW) (2022- ) |
|
| Tiggo 7 1.6 TGDI (145 kW) (2020- ) |
|
| Tiggo 7 1.5 TCI (108 kW) (2016-2020) |
|
| Tiggo 7 1.5 TCI (112 kW) (2016-2017) |
|
Additional Notes
- The Chery Tiggo 7 1.5 TCI (108 kW), covering model years 2016-2020, carries a dry fill capacity of 1.1-1.3 liters for its semi-automatic transaxle. A dry fill figure represents the total fluid volume required when filling a completely drained or disassembled unit, rather than a partial top-up after a routine fluid exchange.
- The 1.5 TCI (112 kW) variant, produced during 2016-2017, shares the same 1.1-1.3 liter dry fill capacity as the 108 kW version of the same engine family, indicating a common transaxle design between the two power outputs despite their differing performance ratings.
- The 1.6 TGDI (145 kW) configuration, introduced from 2020, specifies a notably larger dry fill capacity of 4-4.5 liters for its semi-automatic transaxle. The substantial increase over the 1.5 TCI figures reflects a fundamentally different transmission unit with a considerably greater internal fluid volume.
- The Tiggo 7 1.6 TGDI AWD (110 kW), available from 2022, carries the same 4-4.5 liter dry fill range as the 145 kW 1.6 TGDI variant, suggesting both configurations share the same semi-automatic transaxle assembly regardless of the difference in power output.
- Across all four configurations, the specified capacity values are expressed as ranges rather than fixed figures. A range such as 4-4.5 liters is typical for semi-automatic transaxles where minor manufacturing tolerances or assembly variations can affect the precise volume needed to reach the correct fluid level during a dry fill procedure.
- All four rows carry a normal use condition designation, meaning the listed capacities apply under standard operating circumstances rather than severe-duty cycles such as frequent towing, extreme temperatures, or predominantly short-trip driving.