Chery QQ3

Manual transmission fluid capacity & service interval

Chery QQ3 manual transmission fluid capacity ranges from 1 to 2,1 liters. Service intervals consist of 30000 km/12 months and 30000 km/36 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
QQ3 1.0 (2014-2018)
  • Use: Normal
  • Capacity 2,1 liter
  • Change 30000 km/ 36 months
  • Code: QR512 5/1
QQ3 1.1 (1083 cc) (2006-2015)
  • Use: Normal
  • Capacity 2,1 liter (Dry fill)
  • Capacity 1 liter (Service fill)
  • Change 30000 km/ 12 months
  • Code: QR512 5/1
QQ3 1.1 (1083 cc) (2006-2015)
  • Use: Normal
  • Capacity 2,1 liter (Dry fill)
  • Capacity 1 liter (Service fill)
  • Change 30000 km/ 12 months
  • Code: QR512E 5/1
QQ3 0.8 (2003-2015)
  • Use: Normal
  • Capacity 2,1 liter (Initial fill)
  • Capacity 1 liter (Service fill)
  • Change 30000 km/ 12 months
  • Code: QR512 5/1
QQ3 1.1 (1051 cc) (2003-2006)
  • Use: Normal
  • Capacity 2,1 liter (Initial fill)
  • Capacity 1 liter (Service fill)
  • Change 30000 km/ 12 months
  • Code: QR512 5/1

Additional Notes

  • The Chery QQ3 manual transaxle holds 2.1 liters as an initial or dry fill across the 0.8, 1.1 (1051 cc), and 1.1 (1083 cc) engine variants, reflecting the total fluid volume required when the unit is completely empty.
  • A separate service fill capacity of 1.0 liter is listed for the 0.8, 1.1 (1051 cc), and 1.1 (1083 cc) variants, representing the partial volume needed during a routine drain-and-refill rather than a full overhaul.
  • The 1.0-liter engine variant carries a single capacity figure of 2.1 liters with no separate service fill value, meaning no partial-fill distinction is drawn for routine maintenance on that configuration.
  • The 0.8 and both 1.1 engine variants share a change interval of 30,000 km or 12 months under normal use conditions, whichever comes first.
  • The 1.0-liter variant specifies a change interval of 30,000 km or 36 months under normal use, a notably longer time-based threshold compared to the 12-month limit applied to the other engine variants.
  • The 1.1 (1051 cc) engine covered the 2003-2006 period, while the 1.1 (1083 cc) engine entered production in 2006, indicating a displacement increase within the same nominal 1.1-liter family at that point in the model's history.
  • Despite the displacement difference between the 1051 cc and 1083 cc versions of the 1.1-liter engine, both share identical transaxle fluid capacities and change intervals, suggesting the same gearbox unit was carried over between the two engine generations.

Other Systems