Chery M11 / M12
Manual transmission fluid capacity & service interval
Chery M11 / M12 manual transmission fluid capacity ranges from 2,1 to 2,2 liters. Service intervals consist of 30000 km/12 months and 30000 km/36 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| M11 / M12 1.6 (88 kW) (2008-2015) |
|
| M11 / M12 1.6 (95 kW) (2008-2015) |
|
| M11 / M12 1.8 (2008-2015) |
|
| M11 / M12 1.6 (88 kW) (2008-2015) |
|
| M11 / M12 1.6 (95 kW) (2008-2015) |
|
| M11 / M12 1.8 (2008-2015) |
|
Additional Notes
- The Chery M11 / M12 manual transaxle specifications cover three engine variants across the 2008-2015 model range: the 1.6-litre rated at 88 kW, the 1.6-litre rated at 95 kW, and the 1.8-litre.
- Each engine variant carries two separate capacity figures for the manual transaxle, 2.1 litres and 2.2 litres, each paired with a distinct service interval, indicating the values correspond to different service scenarios rather than a single fill specification.
- The 2.1-litre capacity is paired with a change interval of 30,000 km or 12 months under normal use conditions, across all three engine variants.
- The 2.2-litre capacity is paired with a change interval of 30,000 km or 36 months under normal use conditions, also consistent across all three engine variants.
- The distance-based interval of 30,000 km is identical in both capacity rows for every variant, meaning the kilometre threshold does not change between the two service scenarios, only the time-based limit and the fluid volume differ.
- The 12-month time limit associated with the 2.1-litre fill is considerably shorter than the 36-month limit associated with the 2.2-litre fill, a three-fold difference in the calendar-based component of the same distance interval.
- All six specification rows are classified under normal use conditions, meaning no severe-use intervals or capacities are listed for any of the three engine variants.
- The capacity difference between the two fill figures is 0.1 litre, a relatively small margin that may reflect a drain-and-refill service volume versus a more complete fluid exchange volume, though both are applied within the same normal-use classification.