Chery Eastar Cross

Brake fluid capacity & service interval

Chery Eastar Cross uses brake fluid with a capacity range of min to max. Service intervals occur every 50000 km or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Eastar Cross 2.4 16V (2010-2015)
  • Use: Normal
  • Between min and max.
  • Change 50000 km/ 24 months
Eastar Cross 1.8 16V (2006-2010)
  • Use: Normal
  • Between min and max.
  • Change 50000 km/ 24 months
Eastar Cross 2.0 16V (92 kW) (2006-2010)
  • Use: Normal
  • Between min and max.
  • Change 50000 km/ 24 months
Eastar Cross 2.0 16V (95 kW) (2006-2010)
  • Use: Normal
  • Between min and max.
  • Change 50000 km/ 24 months
Eastar Cross 2.4 16V (2006-2010)
  • Use: Normal
  • Between min and max.
  • Change 50000 km/ 24 months

Additional Notes

  • The Chery Eastar Cross brake fluid capacity is expressed as "between min and max" rather than a fixed volume, which is standard for hydraulic brake and clutch reservoir servicing where the fluid level is maintained within a marked range on the reservoir rather than measured by a precise fill quantity.
  • The hydraulic system note applies to both the brake and clutch circuits across all listed configurations, meaning a single reservoir services both functions in a shared hydraulic layout.
  • All five configurations across the 2006-2015 model range share an identical service interval of 50,000 km or 24 months under normal use conditions, whichever comes first.
  • The dual-trigger interval structure, combining a distance threshold of 50,000 km with a time limit of 24 months, reflects the hygroscopic nature of brake fluid, which absorbs moisture over time regardless of mileage accumulated.
  • The 1.8 16V, 2.0 16V (92 kW), 2.0 16V (95 kW), and 2.4 16V variants from 2006-2010 all carry the same interval specification, indicating no variation in brake fluid service requirements across engine displacements or output levels within that generation.
  • The two 2.0 16V variants from 2006-2010 differ only in power output, at 92 kW and 95 kW respectively, yet share identical brake fluid service specifications, suggesting the difference between the two lies in engine tuning rather than any change to the hydraulic system.
  • The 2.4 16V configuration spans two separate generation entries, covering 2006-2010 and 2010-2015, with both carrying the same 50,000 km or 24-month interval under normal conditions.

Other Systems