Chery B14
Brake fluid capacity & service interval
Chery B14 brake fluid capacity ranges between min and max. Service intervals occur every 50000 km or 24 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| B14 2.4 16V (2010-2015) |
|
| B14 1.8 16V (2006-2010) |
|
| B14 2.0 16V (92 kW) (2006-2010) |
|
| B14 2.0 16V (95 kW) (2006-2010) |
|
| B14 2.4 16V (2006-2010) |
|
Additional Notes
- Across all Chery B14 configurations spanning 2006-2015, the brake fluid reservoir fill level is specified as between the minimum and maximum marks rather than as a fixed volume, which is standard practice for hydraulic brake and clutch systems where the exact quantity depends on component wear state.
- The 2.0 16V engine appears in two distinct output variants for the 2006-2010 period, one rated at 92 kW and another at 95 kW, both sharing identical brake fluid service specifications despite the difference in power output.
- Every configuration listed carries a dual-condition change interval of 50,000 km or 24 months under normal use, meaning whichever threshold is reached first triggers a fluid change.
- The 24-month time limit on the brake fluid change interval reflects the hygroscopic nature of brake fluid, which absorbs moisture from the atmosphere over time and lowers its boiling point regardless of distance driven.
- The 2.4 16V variant is the only engine in the B14 lineup represented across both generation periods, appearing in 2006-2010 and again in 2010-2015, with no change to the brake fluid service interval between the two periods.
- All five configurations share the same 50,000 km / 24-month service interval under normal use conditions, indicating a uniform maintenance schedule for the hydraulic brake and clutch system across the full B14 range covered by these specifications.
- The note identifying the system as a hydraulic brake and clutch system applies to all listed configurations, indicating the brake fluid reservoir serves a combined function for both braking and clutch actuation in the B14.