Chery A3
Brake fluid capacity & service interval
Chery A3 brake fluid capacity ranges between min and max. Service intervals occur every 50000 km or 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| A3 1.6 (88 kW) (2008- ) |
|
| A3 1.6 (95 kW) (2008- ) |
|
| A3 1.8 (2008- ) |
|
| A3 2.0 (2008- ) |
|
Additional Notes
- The Chery A3 brake fluid capacity across all listed configurations is specified as "between min and max," which is a reservoir-level fill indicator rather than a fixed volume. This means the correct fill level is determined by the markings on the brake fluid reservoir rather than a measured quantity.
- The hydraulic system covered by the brake fluid specification serves a dual function on the A3, as the note for each configuration identifies the system as a combined hydraulic brake and clutch system. A single reservoir and fluid supply serves both functions.
- All four A3 configurations share an identical service interval of 50,000 km or 24 months under normal use conditions, whichever comes first. The time-based limit of 24 months reflects the hygroscopic nature of brake fluid, which absorbs moisture over time and lowers its boiling point regardless of mileage.
- The two 1.6-liter variants, rated at 88 kW and 95 kW respectively, carry the same brake fluid specification and interval despite differing in power output. The difference in output does not affect the brake fluid service requirements as listed.
- The 1.8 and 2.0 engine variants introduced alongside the 1.6 configurations from 2008 onward follow the same 50,000 km or 24-month change interval, indicating a uniform brake fluid service schedule across the A3 lineup regardless of engine displacement.